TFT 3.2» Mega touch LCD expansion board shield
Product Description:
TFT01 3.2» Mega Touch LCD Shield
The TFT01 the LCD is operating at 3.3V, this can not be directly used in the standard Arduino motherboard on top, so in order to make the TFT01 the LCD is compatible with the Arduino on the motherboard used in the standard, designed this section of TFT Shield, can be directly inserted in the Arduino on the motherboard use the TFT01 the LCD module.
The TFT01 the LCD can support 16-bit mode, because the Mega2560 enough IO, there would not like to use an SD card interface or touch screen interface can only come across 328S at the same time.
Schematic Of TFT Adaptor Shield
Wiki
Package include:
1 LCD Shield
Debe estar conectado para enviar un comentario.