PCB UV Photosensitive Ink Green Blue Withe PCB UV Curable Solder Resist Ink Solder Mask UV Ink PCB Repairing Paint
N.W. : 100g
Color : Green
Viscosity : 25 ℃ 200 ± 50 ps
Adhesion : 100/100
Hardness : > 5H
Heat resistance : 260 ± 5 ℃ 10 seconds 3 times
Insulation resistance : > 1×1013
Dielectric strength : > 500 V/mil
Apply paint on your PCB
Spread it on the PCB with covering the transparent mask film
Expose it under UV light ( or sun ) for a few minutes
Wash away the extra paint by gasoline or oil base solvent
This paint is used to protect PCB traces from corrosion, moisture.It is also used for repairing PCB after soldering, rework.
Notice: Don’t dilute when using the ink . You need to fully stir well before using it !
1 PCB Solder Mask Repairing Paint