RC-6 IR Remote Controller

RC-6 Remote Controller for Canon EOS

This RC-6 remote control acts as a wireless shutter release capable of instantly triggering the shutter without disturbing the camera. It can trigger the camera shutter release remotely from a distance. The compatible camera has a built-in infrared receiver for this remote trigger device. It is ideal for taking pictures of subjects that are difficult to approach, or to minimize vibration for close-up and time exposure.

Compatible with:
Canon EOS 5D Mark II/EOS 7D/EOS 550D/EOS 500D/EOS 450D/60D/600D and any other canon models which support remote control mode.

Features:
Can be used with shoot cameras compatible with remote control shooting function.
Works from up to 5 meters away.
Compared with the self-timer function, the remote controller give you more time before shooting.
With a switch to delay 2 seconds or not.
Surface part is using high-quality PU material.
Compact and portable design.
Can put easily into your pocket or on a keychain.

Note:
The camera itself To set the remote state.
Remote best angle lens positive (valid 5 m).
If you can not focus, the remote control is no reaction, in a bright place!

[Instructions]
1 Prior to use, you should unplug the battery compartment transparent plastic insulation sheet.
2 The machine itself is set to remote mode (B door, raised to B door and the infrared receiver can be).
3 The remote control at the remote control receiver window facing the camera, from the front of the camera, press the button, it can control the camera to autofocus.
4 The best angle of the remote control is the lens front + right measured 30 degrees, other angles can not be guaranteed.
5 Effective distance: 10 meters farthest (no barrier at night). Such encounters can not focus, the remote control can not result.

Package including:
1 RC-6 Remote Control
1 CR2032 Lithium Battery (Pre-installed)